Description
(Current image is a placeholder which is part of the 3x X84 prototype)
Given the larger size of this case, production times will typically be on the longer end of our estimates listed at the top of the page.
Part of our expandable case series. This can be used as a single case and later optionally expanded with other X-series cases using expansion kits to form a larger modular case. Enclosure is 158mm deep from the front of the rails to the back wall.
It is available in MDF or Koskien birch with an option for up to 2x 4HP cutouts in the back to mount a 4HP power solutions such as the uZeus, or any other 4HP sized module you wish to mount in the back. It includes vents along the back and bottom. Includes optional stands which can be used to angle the case upwards if desired. Comes with all the mounting hardware, including 48 M3 square nuts for the rails (24 nuts per rail), and an allen key to help with assembly.
Note: Image of fully populated enclosure is for illustrative purposes. Eurorack modules, cables, and power supply are not included.
